• Influence of Stacking Sequence and Orientation on Tensile and Flexural Properties of Jute/glass/carbon Fiber Epoxy-based Hybrid Composites

  • Rajesh Kumar Dewangan, Samarjit Singh† , Biplab Das, Manish Bhaskar, Pradeep Patanwar, Pankaj Kumar Gupta, Sung Soo Han*, and Rakesh Bhaskar*,†

  • Department of Mechanical Engineering, School of Studies of Engineering & Technology, Guru Ghasidas Vishwavidyalaya, Bilaspur, Chhattisgarh-495009, India
    *School of Chemical Engineering, Yeungnam University, Gyeongsan-38541, Korea

  • 황마/유리/탄소섬유 에폭시 기반 하이브리드 복합재료의 인장 및 굴곡 특성에 대한 적층 순서 및 배향의 영향

  • Rajesh Kumar Dewangan · Samarjit Singh† · Biplab Das · Manish Bhaskar · Pradeep Patanwar · Pankaj Kumar Gupta · 한성수* · Rakesh Bhaskar*,†

  • Department of Mechanical Engineering, School of Studies of Engineering & Technology, Guru Ghasidas Vishwavidyalaya, Bilaspur
    *영남대학교 화학공학부

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Karimah, A.; Ridho, M. R.; Munawar, S. S.; Adi, D. S.; Ismadi, Damayanti, R.; Subiyanto, B.; Fatriasari, W.; Fudholi, A. A Review on Natural Fibers for Development of Eco-friendly Bio-Composite: Characteristics, and Utilizations. J. Mater. Res. Technol. 2021, 13, 2442-2458.
  •  
  • 2. Ngo, T. Introduction to Composite Materials. In Composite and Nanocomposite Materials, 1st ed.; Ngo, T., Eds.; Intech Open: United Kingdom, 2020, DOI: 10.5772/intechopen.91285.
  •  
  • 3. Sharma, A. K.; Bhandari, R.; Aherwar, A.; Rimašauskiene, R. Matrix Materials Used in Composites: A Comprehensive Study. Mater. Today: Proc. 2020, 21, 1559-1562.
  •  
  • 4. Zhao, X.; Lu, S.; Li, W.; Zhang, S.; Li, K.; Nawaz, K.; Wang, P.; Yang, G.; Ragauskas, A.; Ozcan, S.; Webb, E. Epoxy as Filler or Matrix for Polymer Composites. In Epoxy-Based Composites, 1st ed.; Chelladurai, S. J. S., Arthanari, R., Meera, M. R., Eds.; IntechOpen: United Kingdom, 2022, DOI: 10.5772/intechopen.97898.
  •  
  • 5. Abdellaoui, H.; Raji, M.; Bouhfid, R.; Qaiss, A. 2-investigation of the Deformation Behavior of Epoxy-Based Composite Materials. In Failure Analysis in Biocomposites, Fiber-Reinforced Composites and Hybrid Composites, 1st ed.; Jawaid, M., Thariq, M., Saba, N., Eds.; Woodhead Publishing, Elsevier: Duxford, 2019, pp. 29-49.
  •  
  • 6. Ramakrishnan, T.; Gift, M. D. M.; Chitradevi, S.; Jegan, R.; Jose, P. S. H.; Nagaraja, H. N.; Sharma, R.; Hailegiorgis, S. M. Study of Numerous Resins Used in Polymer Matrix Composite Materials. Adv. Mater. Sci. Eng. 2022, 2022, 1088926.
  •  
  • 7. Rajak, D. K.; Wagh, P. H.; Linul, E. A. Review on Synthetic Fibers for Polymer Matrix Composites: Performance, Failure Modes, and Applications. Materials 2022, 15, 4790.
  •  
  • 8. Velu, S.; Joseph, J. K.; Sivakumar, M.; Raja, V. K. B.; Palanikumar, K.; Lenin, N. Experimental Investigation on the Mechanical Properties of Carbon-Glass-Jute Fiber Reinforced Epoxy Hybrid Composites. Mater. Today: Proc. 2021, 46, 3566-3571.
  •  
  • 9. Venkatasudhahar, M.; Kishorekumar, P.; Raja, N. D. Influence of Stacking Sequence and Fiber Treatment on Mechanical Properties of Carbon-Jute-Banana Reinforced Epoxy Hybrid Composites. Int. J. Polym. Anal. Charact. 2020, 25, 238-251.
  •  
  • 10. Sujon, A. S.; Supto, T. H.; Shariar, F.; Pallab, M. M. R.; Abedin, M. Z.; Habib, M. A. Fabrication and Experimental Investigation on Tensile and Flexural Properties for Different Stacking Sequence of Jute and Carbon Fiber Reinforced Epoxy Composite. Key Eng. Mater. 2020, 858,72-77.
  •  
  • 11. Velmurugan, R.; Manikandan, V. Mechanical Properties of Palmyra/Glass Fiber Hybrid Composites. Compos. A: Appl. Sci. Manuf. 2007, 38, 2216-2226.
  •  
  • 12. Naresh, Ch.; Kumar, Y. R.; Manikantesh, K. Effect of Stacking Sequence and Orientation on Tensile Response of Natural Fiber Reinforced Hybrid Composites: Fibrous-Glass/Hemp/Jute/ Epoxy Composite Plates. Int. J. Eng. Res. Technol. 2016, 5, 161-167.
  •  
  • 13. Abd El-baky, M. A. Evaluation of Mechanical Properties of Jute/Glass/Carbon Fibers Reinforced Hybrid Composites. Fibers Polym. 2017, 18, 2417-2432.
  •  
  • 14. Pothan, L. A.; George, C. N.; John, M. J.; Thomas, S. Dynamic Mechanical and Dielectric Behavior of Banana-Glass Hybrid Fiber Reinforced Polyester Composites. J. Reinf. Plast. Compos. 2010, 29, 1131-1145.
  •  
  • 15. Onal, L.; Adanur, S. Effect of Stacking Sequence on the Mechanical Properties of Glass-Carbon Hybrid Composites Before and After Impact. J. Ind. Text. 2002, 31, 255-271.
  •  
  • 16. Jawaid, M.; Khalil, H. P. S. A.; Hassan, A., Dungani, R.; Hadiyane, A. Effect of Jute Fiber Loading on Tensile and Dynamic Mechanical Properties of Oil Palm Epoxy Composites. Compos. B: Eng. 2013, 45, 619-624.
  •  
  • 17. Nagaraja, K. C.; Rajanna, S.; Prakash, G. S.; Koppad, P. G.; Alipour, M. Studying the Effect of Different Carbon and Glass Fabric Stacking Sequence on Mechanical Properties of Epoxy Hybrid Composite Laminates. Compos. Commun. 2020, 21, 100425.
  •  
  • 18. Parbin, S.; Waghmare, N. K.; Singh, S. K.; Khan, S. Mechanical Properties of Natural Fiber Reinforced Epoxy Composites: A Review. Procedia Comput. Sci. 2019, 152, 375-379.
  •  
  • 19. Kim, S. Y.; Shim, C. S.; Sturtevant, C.; Kim, D. W.; Song, H. C. Mechanical Properties and Production Quality of Hand-Layup and Vacuum Infusion Processed Hybrid Composite Materials for GFRP Marine Structures. Int. J. Nav. Archit. Ocean Eng. 2014, 6, 723-736.
  •  
  • 20. Neves, A. C. C.; Rohen, L. A.; Mantovani, D. P.; Carvalho, J. P. R. G.; Vieira, C. M. F.; Lopes, F. P. D.; Simonassi, N. T.; da Luz, F. S.; Monteiro, S. N. Comparative Mechanical Properties Between Biocomposites of Epoxy and Polyester Matrices Reinforced by Hemp Fiber. J. Mater. Res. Technol., 2020, 9, 1296-1304.
  •  
  • 21. Alam, M. S.; Chowdhury, M. A. Characterization of Epoxy Composites Reinforced with CaCO3-Al2O3-MgO-TiO2/CuO Filler Materials. Alex. Eng. J. 2020, 59, 4121-4137.
  •  
  • 22. Srikar, B.; Rao, L. V. V.G. A Study on Mechanical Properties of Hybrid Fiber Reinforced Polymer Composites. IOP Conf. Ser.: Mater. Sci. Eng. 2021,1185, 012037.
  •  
  • 23. Atmakuri, A.; Palevicius, A.; Kolli, L.;Vilkauskas, A.; Janusas, G. Development and Analysis of Mechanical Properties of Caryota and Sisal Natural Fibers Reinforced Epoxy Hybrid Composites. Polymers 2021, 13, 864.
  •  
  • 24. De Castro, F. L. A.; Campos, B. B.; Bruno, K. F.; Reges, R. V. Temperature and Curing Time Affect Composite Sorption and Solubility. J. Appl. Oral Sci. 2013, 21, 157-162.
  •  
  • 25. ASTM D638, Standard Test Method for Tensile Properties of Plastics. ASTM International, West Conshohocken, PA, USA 2014.
  •  
  • 26. Plonka, R.; Mäder, E.; Gao, S. L.; Bellmann, C.; Dutschk, V.; Zhandarov, S. Adhesion of Epoxy/Glass Fiber Composites Influenced by Aging Effects on Sizings. Compos. Part A Appl. Sci. Manuf. 2004, 35, 1207-1216.
  •  
  • 27. Gupta, U. S.; Dhamarikar, M.; Dharkar, A.; Tiwari, S.; Namdeo, R. Study on the Effects of Fiber Volume Percentage on Banana-Reinforced Epoxy Composite by Finite Element Method. Adv. Compos. Hybrid Mater. 2020, 3, 530-540.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2024 Impact Factor : 0.6
  • Indexed in SCIE

This Article

  • 2023; 47(5): 574-581

    Published online Sep 25, 2023

  • 10.7317/pk.2023.47.5.574
  • Received on Jan 28, 2023
  • Revised on Apr 26, 2023
  • Accepted on Jun 13, 2023

Correspondence to

  • Samarjit Singh, Rakesh Bhaskar*

  • Department of Mechanical Engineering, School of Studies of Engineering & Technology, Guru Ghasidas Vishwavidyalaya, Bilaspur, Chhattisgarh-495009, India
    *School of Chemical Engineering, Yeungnam University, Gyeongsan-38541, Korea

  • E-mail: samarjitsingh05@gmail.com, indiaxenobiotic@gmail.com