• Surface Morphology of PMMA Seed-Core Particles Prepared by Nonaqueous Dispersion Polymerization
  • Lee KC
  • 비수계 분산중합에 의해 제조된 PMMA Seed-Core 입자의 Surface Morphology에 관한 연구
  • 이기창
Abstract
In order to study surface morphology of the PMMA seed-core latex particles prepared using butyl rubber-stabilized PMMA seed, various types of acrylic dispersion particles were prepared by 2 stage non-aqueous dispersion polymerization in aliphatic hydrocarbon media. The surface morphology and the degree of wrinkles of the resulting PMMA seed-core particles were found to be greatly influenced by polymerization process, initial amount of AIBN, EGDMA concentration, feeding time of monomer mixture, and polymerization temperature at the second-stage polymerization. The reaction condition for formation of the "raisin-like" particles was found to be by semi-continuous polymerization in the presence of 0.29g EGDMA cross-linker and 0∼0.011g AIBN at the second-stage polymerization using butyl-rubber stabilized PMMA seed latex.

Butyl rubber-stabilized PMMA seed를 이용하여 2단계 비수계 분산중합에 의해 생성한 PMMA seed-core 라텍스입자의 표면 모폴로지를 조사하기 위하여 다양한 중합조건하에서 다양한 입자표면 모폴로지를 갖는 PMMA seed-core 라텍스를 제조하였다. 생성한 PMMA seed-core 라텍스 입자의 표면 모폴로지는 2단계 중합과정에서의 중합공정, 중합초기 개시제의 농도, 가교제의 농도, 단량체 부가시간, 중합온도 등에 크게 영향을 받는 것을 확인하였다. 건포도와 같이 입자 표면이 쭈글쭈글한 입자는 반회분식공정에 의해 0∼0.011g의 AIBN, 0.29g의 EGDMA, 150분의 단량체 부가시간, 105℃의 중합온도의 조건하에서 생성되었다.

Keywords: non-aqueous dispersion polymerization; surface morphology; raisin-like particle; PMMA seed-core particles; polymerization process

References
  • 1. Almog Y, Reich S, Levy M, Br. Polym. J., 14, 131 (1982)
  •  
  • 2. Ober CK, Lok KP, Hair ML, J. Polym. Sci. C: Polym. Lett., 23, 103 (1985)
  •  
  • 3. Lu YY, El-Aasser MS, Vanderhoff JW, J. Polym. Sci. B: Polym. Phys., 26, 1187 (1988)
  •  
  • 4. Paine AJ, J. Colloid Interface Sci., 138, 157 (1990)
  •  
  • 5. Shen S, Sudol ED, El-Aasser MS, J. Polym. Sci. A: Polym. Chem., 31, 1393 (1993)
  •  
  • 6. Ottewill RHPolymer Colloids in Nonaqueous Media, J.W. Goodwin and R. Buscall, Eds. p. 3-9, Academic Press (1995)
  •  
  • 7. Barret KEJ, Thomas HR, J. Polym. Sci. A: Polym. Chem., 7, 2621 (1969)
  •  
  • 8. Disnayaka B, Winnik MA, Croucher MD, J. Colloid Interface Sci., 136, 552 (1990)
  •  
  • 9. Lee KC, Winnik MA, Korea Polym. J., 2(1), 47 (1994)
  •  
  • 10. Lee KC, Winnik MA, Jao TC, J. Polym. Sci. A: Polym. Chem., 32(12), 2333 (1994)
  •  
  • 11. Williamson BJ, Lukas R, Winnik MA, Croucher MD, J. Colloid Interface Sci., 119(2), 559 (1987)
  •  
  • 12. Barrett KEJDispersion Polymerization in Organic Media, Wiley, New York (1975)
  •  
  • 13. Antl L, Goodwin JN, Hill RD, Ottewill RH, Owens SM, Papworth S, Waters JW, Colloids Surf., 17, 67 (1987)
  •  
  • 14. Barrett KEJ, Thomas HR, J. Polym. Sci. A: Polym. Chem., 7, 2621 (1969)
  •  
  • 15. Croucher MD, Winnik MAAn Introduction to Polymer Colloids, F. Candau and R.H. Ottewill, Eds., p. 35, Kluwer Academic Publishers, Netherlands (1990)
  •  
  • 16. Winnik MA, Croucher MDFuture Directions in Polymer Colloids, M.S. El-Aasser and R.M. Fitch, Eds., NATO Ser. E. 138, p. 277, Kluwer Academic Publishers, Netherlands (1987)
  •  
  • 17. Okubo M, Katsuta Y, Matsmoto T, J. Polym. Sci. C: Polym. Lett., 20, 45 (1982)
  •  
  • 18. Wessling RA, Gibbs DS, J. Macromol. Sci.-Chem., A7(3), 647 (1973)
  •  
  • 19. Krackeler JJ, Naidus H, J. Polym. Sci. C: Polym. Lett., 27, 207 (1969)
  •  
  • 20. Lee KC, El-Aasser MS, Vanderhoff JW, J. Appl. Polym. Sci., 45, 3133 (1991)
  •  
  • 21. Vanderhoff JW, Sheu HR, El-Aasser MSScientific Methods for the Study of Polymer Colloids and Their Applications, F. Candau and R.H. Ottewill, eds., Kluwer Academic Publishers, Netherlands (1990)
  •  
  • 22. Pekcan O, Winnik MA, Croucher MD, J. Polym. Sci. C: Polym. Lett., 21, 1011 (1983)
  •  
  • 23. Tseng CM, Lu YY, El-Aasser MS, Vanderhoff JW, J. Polym. Sci. A: Polym. Chem., 24, 2995 (1986)
  •  
  • 24. Winnik MA, Lukas R, Chen F, Furlong P, Croucher MD, Makromol. Chem. Macromol. Symp., 10-11, 483 (1987)
  •  
  • 25. Willamson B, Lukas R, Winnik MA, Croucher MD, J. Colloid Interface Sci., 110, 559 (1987)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2024 Impact Factor : 0.6
  • Indexed in SCIE

This Article

  • 1997; 21(3): 383-394

    Published online May 25, 1997