• Thermal Behavior of Nylon 6 and Bisphenol-A Polycarbonate Blends Compatibilized with an Epoxy Resin
  • Abdrhman MJM, Zhang L, Zhou B, Li H
  • 에폭시 수지로 상용화된 Nylon 6와 비스페놀-A PC 블렌드의 열적거동
Abstract
Diglycidyl ether of bisphenol-A (DGEBA) was selected as a compatibilizer in Nylon 6 and bisphenol-A polycarbonate (PC) blends. SEM revealed a much finer morphology in the presence of DGEBA. The thermal properties, such as glass transition, melting point, crystallization temperature and rate, of the blends were examined using DSC. Overall, the introduction of DGEBA caused a strong dependence of these thermal properties on the composition due to compatibilization.

Keywords: Nylon 6; polycarbonate; DEGBA

References
  • 1. Gattiglia E, Turturro A, Pedemonte E, J. Appl. Polym. Sci., 38, 1807 (1989)
  •  
  • 2. Gattiglia E, Turturro A, Pedemonte E, Dondero G, J. Appl. Polym. Sci., 41, 1411 (1990)
  •  
  • 3. Costa DA, Oliveira CMF, J. Appl. Polym. Sci., 81(10), 2556 (2001)
  •  
  • 4. Cortazar M, Eguiazabal J, Iruin J, Brit. Polym. J., 21, 395 (1989)
  •  
  • 5. Eguiazabal JI, Nazabal J, Plast. Rubber Process Appl., 14, 211 (1990)
  •  
  • 6. Montaudo G, Puglisi C, Samperi F, Lamantia FP, J. Polym. Sci. A: Polym. Chem., 34(7), 1283 (1996)
  •  
  • 7. Gattiglia E, Turturro A, Lamantia FP, Valenza A, J. Appl. Polym. Sci., 46, 1887 (1992)
  •  
  • 8. Kim WN, Park CE, Burns CM, J. Appl. Polym. Sci., 49, 1003 (1993)
  •  
  • 9. Kawahara S, Sato K, Akiyama S, J. Polym. Sci. B: Polym. Phys., 32(1), 15 (1994)
  •  
  • 10. Jannasch P, Wesslen B, J. Appl. Polym. Sci., 58(4), 753 (1995)
  •  
  • 11. Tavares MI, Castro WP, Costa DA, J. Appl. Polym. Sci., 55(8), 1165 (1995)
  •  
  • 12. Costa DA, Oliveira CMF, J. Appl. Polym. Sci., 69(5), 857 (1998)
  •  
  • 13. Costa DA, Oliveira CMF, Tavares MIB, J. Appl. Polym. Sci., 69(1), 129 (1998)
  •  
  • 14. Simal AL, Oriani LAG, J. Appl. Polym. Sci., 46, 1887 (1992)
  •  
  • 15. Wang TT, Nishi T, Macromolecules, 10, 421 (1977)
  •  
  • 16. Martuscelli E, Silvestre C, Gismondi C, Makromol. Chem., 186, 2161 (1985)
  •  
  • 17. Martuscelli E, Riva F, Sellitti C, Silvestre C, Polymer, 26, 270 (1985)
  •  
  • 18. Men Y, Rieger J, Eur. Polym. J., 40, 2629 (2004)
  •  
  • 19. Ramesh C, Gowd EB, Macromolecules, 34(10), 3308 (2001)
  •  
  • 20. Yamaguchi M, Gogos CG, Adv. Polym. Technol., 20(4), 261 (2001)
  •  
  • 21. Yamaguchi M, Todd DB, Gogos CG, Adv. Polym. Technol., 22(3), 179 (2003)
  •  
  • 22. Mark JE, Ed., Polymer Data Handbook, Oxford University Press, Inc., 1999
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2024 Impact Factor : 0.6
  • Indexed in SCIE

This Article

  • 2008; 32(6): 523-528

    Published online Nov 25, 2008

  • Received on Apr 3, 2008
  • Accepted on Aug 4, 2008