Article
  • Development of Adhesive for Laminated Electrical Steels Having Excellent Adhesion and Oil Resistance and Its Application for Dot-bonded Motor Core for Electric Vehicle

  • Seung-Soo Kim# , Jae Hoon Lee*,# , Hoon Ryu*, Kahyun Lim*, Junseop Im*, Chi-Wan Lee*, and Chun-Kyu Lee**,†

  • BMC Co., Ltd, #12 Seombawi-gil, Wongok-myeon, Anseong-si, Gyeonggi-do 17557, Korea
    *Industrial Biotechnology Research, Samyang Corp., 730, Daedeok-daero, Yuseong-gu, Daejeon 34055, Korea
    **Department of Metalmold Design Engineering, Kongju National University, 1223-24, Cheonan-daero, Seobuk-gu, Cheonan 31080, Korea

  • 접착성 및 내유성이 뛰어난 코팅 전기강판용 접착제 개발 및 전기차용 도트접착형 구동 모터코어에의 적용

  • 김승수# · 이재훈*,# · 류 훈* · 임가현* · 임준섭* · 이치완* · 이춘규**,†

  • (주)비엠씨, *(주)삼양사 융합소재연구소 산업바이오PG, **공주대학교 금형설계공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Iosif, V.; Roger, D.; Duchesne, S.; Malec, D. Assessment and Improvements of Inorganic Insulation for High Temperature Low Voltage Motors. IEEE Trans. Dielectr. Electr. Insul. 2016, 23, 2534-2542.
  •  
  • 2. Takashima, M.; Morito, N.; Honda, A.; Maeda, C. Nonoriented Electrical Steel Sheet with Low Iron Loss for High-efficiency Motor Cores. IEEE Trans. Magn. 1999, 35, 557-561.
  •  
  • 3. Schoppa, A.; Delarbre, P.; Soft Magnetic Powder Composites and Potential Applications in Modern Electric Machines and Devices. IEEE Trans. Magn. 2014, 50, 1-4.
  •  
  • 4. Krings, A.; Monissen, C. Review and Trends in Electric Traction Motors for Battery Electric and Hybrid Vehicles. Proceedings of 2020 International Conference on Electrical Machines (ICEM), IEEE, Gothenburg, Sweden, Aug 23-26, 2020.
  •  
  • 5. Lei, G.; Bramerdorfer, G.; Liu, C.; Guo, Y.; Zhu, J. Robust Design Optimization of Electrical Machines: A Comparative Study and Space Reduction Strategy. IEEE Trans. Energy Convers 2021, 36, 300.
  •  
  • 6. Riviére, N.; Villani, M.; Popescu, M. Optimisation of a High Speed Copper Rotor Induction Motor for a Traction Application. Proceedings of IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, IEEE, Lisbon, Portugal, Oct 14-17, 2019.
  •  
  • 7. Jacobs, S.; Vandenbossche, L.; Attrazic, E. How Electrical Steel Optimizes Traction Electric Machine Design: A Serviceable Contribution to Electric Vehicles. IEEE Electrif. Mag. 2019, 7, 39-48.
  •  
  • 8. Selvaraj, D. E.; Ganesan, J. Experimental Analysis of Efficiency and Thermal Withstanding Capacity of Three Phase Squirrel Cage Induction Motor Coated with SiO2 & TiO2 Nano Composite Filled Enamel. Int. J. Eng. Sci. 2013, 2, 115-118.
  •  
  • 9. Khatib, A. R.; Appannagari, M.; Manson, S.; Goodall, S.; Load Modeling Assumptions: What is Accurate Enough? Proceedings of 2015 IEEE Petroleum and Chemical Industry Committee Conference (PCIC), IEEE, Houston, TX, USA, Oct 5-7, 2015.
  •  
  • 10. Korzunin, G. S.; Lobanov, M. L.; Redikultsev, A. A.; Lobanova, L. V. Control of the Dielectric Properties of a Grain Oriented Electrical Steel Coating. Russ. J. Nondestruct. Test. 2014, 50, 585-588.
  •  
  • 11. Puzhevich, R. B.; Tsyrlin, M. B.; Korzunin, G. S. Effect of Electrical Insulating Coatings on the Properties of Anisotropic Electrical-sheet Steel. Phys. Met. Metallogr. 2006, 102, 366-375.
  •  
  • 12. Takizawa, K.; Suetsugu, T.; Iwata, T.; Miyake, H.; Tanaka, Y.; Takada, T. Study on Accumulation Mechanism of Space Charge in Covering Insulating Material for Motor Windings. Proceedings of 2014 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), IEEE, Des Moines, IA, USA, Oct 19-22, 2014.
  •  
  • 13. Wang, H.; Zhang, Y.; Li, S. Laser Welding of Laminated Electrical Steels. J. Mater. Process. Technol. 2016, 230, 99-108.
  •  
  • 14. Handgruber, P.; Stermecki, A.; Bíró, O.; Ofnery, G. Evaluation of Interlaminar Eddy Currents in Induction Machines. Proceedings of IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, IEEE, Vienna, Austria, Nov 10-13, 2013.
  •  
  • 15. Clerc, A. J.; Muetze, A. Measurement of Stator Core Magnetic Degradation During the Manufacturing Process. IEEE Trans. Ind. Appl. 2012, 48, 1344-1352.
  •  
  • 16. Siebert, R.; Schneider, J.; Beyer, E. Laser Cutting and Mechanical Cutting of Electrical Steels and its Effect on the Magnetic Properties. IEEE Trans. Magn. 2014, 50, 1-4.
  •  
  • 17. Pugstaller, R.; Wallner, G. M. Development of a Fracture-mechanics Based Fatigue Testing Method for Epoxy/electrical Steel Laminates with Thin Adhesive Layer. Eng. Fract. Mech. 2021, 258, 1-8.
  •  
  • 18. Ziegler, M.; Mayr, A.; Seefried, J.; Kuehl, A.; Franke, J. Potentials of Process Monitoring During Laser Welding of Electrical Steel Laminations. Proceedings of 2019 9th International Electric Drives Production Conference (EDPC), IEEE, Esslingen, Germany, Dec 3-4, 2019.
  •  
  • 19. Nakayama, T.; Kojima, H. Interlocking Performances on Non-Oriented Electrical Steels. J. Mater. Eng. Perform 2007, 16, 7-11.
  •  
  • 20. Lamprecht, E.; Graf, R. Fundamental Investigations of Eddy Current Losses in Laminated Stator Cores Created Through the Impact of Manufacturing Processes. Proceedings of 2011 1st International Electric Drives Production Conference (EDPC) Nuremberg, Germany, Nuremberg, Germany, Sep 28-29, 2011.
  •  
  • 21. Lamprecht, E.; Hömme, M.; Albrecht, T. Investigations of Eddy Current Losses in Laminated Cores due to the Impact of Various Stacking Processes. Proceedings of 2012 2nd International Electric Drives Production Conference (EDPC), Nuremberg, Germany, Oct 15-18, 2012.
  •  
  • 22. Wang, H.; Zhang, Y.; Lai, X. Effects of Interfaces on Heat Transfer in Laser Welding of Electrical Steel Laminations. Int. J. Heat Mass Transf. 2015, 90, 665-677.
  •  
  • 23. Liao, X. J.; Zhang, L.; Dong, X. Y. Self-Bonding Effect Develop-ment for Plasma Spraying of Stainless Steel Coating Through Using Mo-Clad Stainless Steel Powders. JOM 2020, 72, 4613-4623.
  •  
  • 24. Lu, S.; Chai, B.; Liu, Y.; Liu, J.; Jiang, H.; Gu, S.; Liu, J. The Experimental Study on the Influence Factors in Adhesive Dispensing Dot Diameter of Impact Jetting Valve. IEEE Trans. Compon. Packaging Manuf. Technol. 2016, 6, 326-330.
  •  
  • 25. Kim, S. S. Apparatus for Manufactuuring Laminated Core by Adhesive Type, KR 0-1729289 B1, 2017.
  •  
  • 26. Shena, L.; Li, Y.; Zhenga, J.; Lua, M.; Wu, K. Modified Epoxy Acrylate Resin for Photocurable Temporary Protective Coatings. Prog. Org. Coat. 2015, 89, 17-25.
  •  
  • 27. Łukaszczyk, J.; Janicki, B.; Kozuch, J.; Wojdyła, H. Synthesis and Characterization of Low Viscosity Dimethacrylic Resin Based on Isosorbide. J. Appl. Polym. Sci. 2013, 130, 2514-2522.
  •  
  • 28. Semoto, T.; Tsuji, Y.; Yoshizawa, K. Molecular Understanding of the Adhesive Force between a Metal Oxide Surface and an Epoxy Resin. J. Phys. Chem. C 2011, 115, 11701-11708.
  •  
  • 29. Guo, F.; Zhang, C. Oil-Cooling Method of the Permanent Magnet Synchronous Motor for Electric Vehicle. Energies 2019, 12, 2984-2994.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2022; 46(5): 583-590

    Published online Sep 25, 2022

  • 10.7317/pk.2022.46.5.583
  • Received on Apr 14, 2022
  • Revised on Jun 13, 2022
  • Accepted on Jul 15, 2022

Correspondence to

  • Chun-Kyu Lee

  • Department of Metalmold Design Engineering, Kongju National University, 1223-24, Cheonan-daero, Seobuk-gu, Cheonan 31080, Korea

  • E-mail: ckt1230@kongju.ac.kr