Article
  • Orientation Characteristics of Nylon 6/Polyketone Blends with Chain Extender

  • Tao Zhang and Ho-Jong Kang†

  • Department of Polymer Science and Engineering, Dankook University, 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do 16890, Korea

  • 사슬연장제를 함유한 나일론 6/폴리케톤 블렌드의 배향 특성 연구

  • 장타오 · 강호종†

  • 단국대학교 고분자공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Nakano, K.; Kosaka, N. T.; Nozaki, K. Metal-catalyzed Synthesis of Stereoregular Polyketones, Polyesters, and Polycarbonates. Dalton Trans. 2003, 6, 4039-4050.
  •  
  • 2. Mul, W. P.; Dirkzwager, H.; Broekhuis, A. A.; Heeres, H. J.; Linden, A. J.; Orpen, A. G. Highly Active, Recyclable Catalyst for the Manufacture of Viscous, Low Molecular Weight, CO-ethene-propene-based Polyketone, Base Component for a New Class of Resins. Inorganica Chim. Acta 2002, 327, 147-159.
  •  
  • 3. Wang, Y.; Hou, D. F.; Ke, K.; Huang, Y. H.; Yan, Y.; Yang, W.; Yin, B.; Yang, M. B. Chemical-resistant Polyamide 6/Polyketone Composites with Gradient Encapsulation Structure: An Insight into the Formation Mechanism. Polymer 2021, 212, 123173-123182.
  •  
  • 4. You, J. W.; Lee, Y. M.; Choi, H. H.; Kim, T. A.; Lee, S. S.; Park, J. H. Thermally Stable and Highly Recyclable Carbon Fiber-reinforced Polyketonecomposites Based on Mechanochemical Bond Formation. Compos. Part A Appl. Sci. Manuf. 2021, 142, 106251-106259.
  •  
  • 5. Lee, H. C.; Son, Y.; Lee, S. Study of Compatibility Between Aliphatic Polyketone Terpolymer and Poly(styrene-r-acrylonitrile). J. Appl. Polym. Sci. 2020, 137, 48743-48754.
  •  
  • 6. Zhu, F. Y.; Zhong, J.; Shen, Q.; Jia, D. X.; Ma, S. J.; Du, J.; Wu, H.; Yang, Q.; Cao, M.; Liu, Z. Q.; Zheng, Y. G. Development of an Escherichia coli Whole Cell Catalyst Harboring Conjugated Polyketone Reductase from Candida Glabrata for Synthesis of d-(-)-pantolactone. Process Biochem. 2022, 112, 223-233.
  •  
  • 7. Vavasori, A.; Ronchin, L.; Toniolo, L. Terpolymerization of Propene and Ethene with Carbon Monoxide Catalyzed by [PdCl2(dppf)] in HCOOH-H2O as a Solvent [dppf=1,1′-bis(diphenylphosphino)ferrocene]. Appl. Catal. A-Gen. 2010, 389, 108-113.
  •  
  • 8. Miller, H. A.; Moneti, S.; Vizza, F.; Passaglia, E.; Bianchini, C.; Bronco, S.; Silvia Ceriegi, S.; Sulcis, R.; Frediani, M.; Ciardelli, F.; Costa, G. Polyketone Nanocomposites by Palladium-Catalyzed Ethylene-Carbon Monoxide-(Propene) Co(Ter)polymerization Inside an Unmodified Layered Silicate. E-Polym. 2006, 6, 3.
  •  
  • 9. Marklund, E.; Gedde, U. W.; Hedenqvist, M. S.; Wiberg, G. Properties of Polyketone/Polypropylene Blends. Polymer 2001, 42, 3153-3160.
  •  
  • 10. Lu, X. H.; Lim, K. Y.; Lim, F. Y.; Liu, L. H.; Wong, S. C.; Zhao, J. H. Morphology and Structures of Polypropylene-aliphatic Polyketone Blends. Plast. Rubber Compos. 2002, 31, 147-150.
  •  
  • 11. Kim, Y.; Bae, J. W.; Lee, C. S.; Kim, S.; Jung, H.; Jho, J. Y. Morphology and Mechanical Properties of Polyketone Blended with Polyamide and Ethylene-Octene Rubber. Macromol. Res. 2015, 23, 971-976.
  •  
  • 12. Lim, M. Y.; Kim, H. J.; Baek, S. J.; Kim, K. Y.; Lee, S. S.; Lee, J. C. Improved Strength and Toughness of Polyketone Composites Using Extremely Small Amount of Polyamide 6 Grafted Graphene Oxides. Carbon 2014, 77, 366-378.
  •  
  • 13. Liu, Q. S.; Xu, Y.; Zhang, H. X.; Li, Y. H.; Deng, B. Y. Polypropylene/Polyamide Elastomer Blends: Morphology and Mechanical Property. Polym. Korea 2014, 38, 613-619.
  •  
  • 14. Li, S. Y.; Yang, Y.; Zha, X. J.; Zhou, Y. C.; Yang, W.; Yang, M. B. Nanoscale Morphology, Interfacial Hydrogen Bonding, Confined Crystallization and Greatly Improved Toughness of Polyamide 12/Polyketone Blends. Polymers 2018, 8, 932-947.
  •  
  • 15. He, Y. C.; Luo, R. Q.; Li, Z. L.; Lv, R. H.; Zhou, D. S.; Lim, S.; Ren, X. N.; Gao, H. X.; Hu, W. B. Comparing Crystallization Kinetics between Polyamide 6 and Polyketone via Chip-Calorimeter Measurement. Macromol. Chem. Phys. 2018, 219, 1700385-1700390.
  •  
  • 16. Li, X. H.; He, Y. C.; Dong, X.; Ren, X. N.; Gao, H. X.; Hu, W. B. Effects of Hydrogen-bonding Density on Polyamide Crystallization Kinetics. Polymer 2020, 189, 122165-122173.
  •  
  • 17. Asano, A.; Nishioka, M.; Takahashi, Y.; Kato, A.; Hikasa, S.; Iwabuki, H.; Nagata, K.; Sato, H.; Hasegawa, T.; Sawabe, H.; Arao, M.; Suda, T.; Isoda, T.; Mukai, M.; Ishikawa, D.; Izumi, T. High Impact Properties of Polyketone/Polyamide-6 Alloys Induced by Characteristic Morphology and Water Absorption. Macromolecules 2009, 42, 9506-9514.
  •  
  • 18. Lin, F. L.; Liu, Y. J.; Song, L. J.; Hao, X. H.; Liu, X. C.; Fan, S. H.; Wu, Y. C.; Mao, L. Preparation of Biaxially Oriented Polyamide 6/Polyketone/Graphene Oxide Films with Enhanced Barrier and Mechanical Behaviors. J. Appl. Polym. Sci. 2021, 138, 5051-5059.
  •  
  • 19. Cai, J. N.; Liu, Z. P.; Cao, B.; Guan, X. X.; Liu, S. M.; Zhao, J. Q. Simultaneous Improvement of the Processability and Mechanical Properties of Polyamide-6 by Chain Extension in Extrusion. Ind. Eng. Chem. Res. 2020, 59, 14334-14343.
  •  
  • 20. Tuna, B.; Benkreira, H. Reactive Extrusion of Polyamide 6 Using a Novel Chain Extender. Polym. Eng. Sci. 2019, 59, E25-E31.
  •  
  • 21. Xu, M. L.; Yan, H. C.; He, Q. J.; Wan, C.; Liu, T.; Zhao, L.; Park, C. B. Chain Extension of Polyamide 6 Using Multifunctional Chain Extenders and Reactive Extrusion for Melt Foaming. Eur. Polym. J. 2017, 96, 210-220.
  •  
  • 22. Zhang, T.; Kang, H. J. Enhancement of the Processability and Properties of Nylon 6 by Blending with Polyketone. Polymers 2021, 13, 3403-3417.
  •  
  • 23. Kato, A.; Nishioka, M.; Takahashi, Y.; Suda, T.; Sawabe, H.; Isoda, A.; Drozdova, O.; Hasegawa, T.; Izumi, T.; Nagata, K.; Hikasa, S.; Iwabuki, H.; Asano, A. Phase Separation and Mechanical Properties of Polyketone/Polyamide Polymer Alloys. J. Appl. Polym. Sci. 2010, 116, 3056-3069.
  •  
  • 24. Kwon, H. G.; Hwang, T.; Kim, D. H.; Son, Y. Study on the Effect of Chemical Reaction Between Component Polymers and Gelation on the Physical Properties of Aliphatic Polyketone/polyamide 6 Blends. Polym. Korea 2021, 45, 748-756.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2022; 46(6): 744-751

    Published online Nov 25, 2022

  • 10.7317/pk.2022.46.6.744
  • Received on May 26, 2022
  • Revised on Jun 19, 2022
  • Accepted on Jun 21, 2022

Correspondence to

  • Ho-Jong Kang

  • Department of Polymer Science and Engineering, Dankook University, 152 Jukjeon-ro, Suji-gu, Yongin-si, Gyeonggi-do 16890, Korea

  • E-mail: hjkang@dankook.ac.kr